B071BA00 PETZL ASAP LOCK Mobile fall arrester with locking function

Description

ASAP
®
LOCK
Mobile fall arrester with locking function
The ASAP LOCK mobile fall arrester is designed to facilitate handling during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In case of shock or sudden movement, the fall arrester locks on the rope and stops the user. The integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. The connection arm makes the system drop-resistant when passing intermediate anchors. The ASAP LOCK is used with an ASAP'SORBER or ASAP'SORBER AXESS energy absorber to work at a distance from the rope.
Detailed description
Description
Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fall
Integrated locking function allows the user to immobilize the device in order to reduce the length of a fall. In case of a strong wind, this function also prevents the rope from being blown upward
Simple to use, and effective:
- moves up or down the rope, without any manual manipulation of the device
- easy to install and remove at any point on the rope
- connection arm makes the system drop-resistant when passing intermediate anchors
- used with an energy absorber to work at a distance from the rope: ASAP'SORBER or ASAP'SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situations
Specifications
Material(s): aluminum, stainless steel, nylon
Weight: 425 g
Certification(s): CE EN 12841 type A when used with an ASAP’SORBER or ASAP'SORBER AXESS energy absorber, and an EN 1891 type A, 10-13 mm rope
Certification(s): CE EN 353-2 when used with an ASAP’SORBER or ASAP'SORBER AXESS energy absorber, and an ASAP'AXIS 11 mm or AXIS 11 mm rope with a sewn termination
Certification(s): EAC when used with an ASAP’SORBER or ASAP'SORBER AXESS energy absorber, and an EN 1891 type A, 10-13 mm rope
Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 12 mm rope
References
References
B071BA00
Guarantee
3 years
Packing
1
ASAP’SORBER
Energy absorber for ASAP or ASAP LOCK
The ASAP’SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.
Detailed description
Description
May only be used with an ASAP or ASAP LOCK mobile fall arrester
Allows the user to keep the rope at a distance in order to:
- free up the work area
- protect the rope from sharp tools and harmful contact points
Absorbs energy in case of a fall:
- tearing of the energy absorber webbing limits the impact force on the user
- designed for users who weigh between 50 and 130 kg
- durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber
Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion
Available in two lengths, to provide the best balance between distance from the rope and reducing fall length
Specifications
Material(s): nylon, polyester
Certification(s): CE EN 355, ANSI Z359.13 6 feet, EAC
References
References
L071AA00
L071AA01
Length
20 cm
40 cm
Weight
125 g
145 g
Guarantee
3 years
3 years
Packing
1
1
SAP’SORBER AXESS
Energy absorber for ASAP or ASAP LOCK for a maximum load of 250 kg
The ASAP’SORBER AXESS energy absorber may only be used with the ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. In can be used in two-person rescue situations for a maximum load of 250 kg.
Detailed description
Description
May only be used with an ASAP or ASAP LOCK mobile fall arrester
Allows the user to keep the rope at a distance in order to:
- free up the work area
- protect the rope from sharp tools and harmful contact points
Absorbs energy in case of a fall:
- tearing of the energy absorber webbing limits the impact force on the user
- designed for users who weigh between 50 and 130 kg Can be used for loads of up to 250 kg in two-person rescue situations
- durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber
Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion
Specifications
Material(s): nylon, polyester
Certification(s): CE EN 355, ANSI Z359.13 6 feet
References
References
L071CB00
Length
40 cm
Weight
205 g
Guarantee
3 years
Packing
1